cnReach N550 450 MHz ETSI RED Narrowband Fixed Wireless

Combining cnReach’s licensed and unlicensed narrow-band radios with Cambium Networks’ broadband technologies, industrial organizations are delivering end-to-end IIOT solutions today.

The cnReach™ N550 450 MHz ETSI RED narrowband fixed wireless model provides reliable licensed band connectivity with extensive I/O capabilities to ease migration to all-IP networks.

With dual radio options, an 8 W output power, wide 406-470 MHz coverage, and adaptive modulation cnReach enables connectivity in the most diverse environments. The ETSI RED model is fully compliant the ETSI RED directives that went into place in 2017.

cnReach N500 220 MHz, cnReach 450 MHz ETSI RED, cnReach N500 700 MHz, cnReach N500 450 MHz FCC, cnReach N500 900 MHz

Key Features

  • Licensed 450 MHz (406–470 MHz); ETSI RED Compliant w/CE Mark (also available in an FCC model)
  • Point-to-point, Point-to-multipoint, and Back-to-back Relay configurations (dual radios)
  • Adds higher performance with reduced headers, low overhead mode, QoS support and payload compression
  • Secure communications with AES 128/256bit encryption and password authentication
  • Highly reliable communications with access point synchronization and adaptive modulation
  • Single and dual radio configurations for advanced back-to-back relay topologies
  • Extensive I/O capabilities easing the transition from serial to all-IP networks with two serial ports, two Ethernet ports, and optional analog/digital I/O built-in
  • Sophisticated network planning with LINKPlanner, a nocharge planning tool enabling network designers to predict both capacity and availability of networks crossing all of Cambium’s technologies
  • Supported by cnMaestro™ Network Management software for monitoring the status of entire networks
  • Fully compatible and interoperable with N500 450 MHz ETSI radios

cnReach N550 450 MHz ETSI RED Narrowband Fixed Wireless

Specifications

UL
Approved
EMC/Safety
CE Mark
Safety: EN60950-1: 2006 + A11:2009:2010+A12:2011+A2:2013
EMC: EN 301 489-1 v2.1.1, EN 301 489-5 v2.1.1
Health EME: EN 50385:2002
Radio: EN 300 113 v2.2.1
RoHS: EN 50581:2012
Frequency Range
406–470 Mhz
Output TX Power
100mW to 8W (13 dBm to 39 dBm)
Step Size
10mW
Modulations
BPSK / MSK / QPSK / 8PSK / 16QAM / 32QAM
Capacity
9.6 kbps to 44 kbps RF data rate; up to 26 kbps UDP throughput in 12.5 kHz channels
Channel Bandwidth
12.5 / 25 kHz (50 / 100 kHz available regulations permitting and by request)
Range
Up to 110 km / 70 miles
Packet Handling
Layer 2 bridge, Layer 3 static routes, VLAN support
Data Encryption
128/256-bit AES
Packet Handling
Layer 2 bridge, Layer 3 static routes, VLAN support
Data Encryption
128/256-bit AES
Web-based Interface via HTTP/HTTPS
LINKPlanner integration (capacity and availability planning)
Remote Management via SNMP
cnMaestro™ integration
Support for configuration files, remote software upgrades
Built-in diagnostic tools via web interface such as RF Ping and RF throughput
Ethernet Interfaces
2 x RJ-45
10/100BaseT, Full Duplex, rate auto negotiated (802.3 compliant)
Serial Interfaces
2 x RJ-45
RS-232/422/485, up to 230.4 kbps
Dimensions
168 x 876 x 466 (6.625 x 3.45 x 1.835 in)
Weight: Single-Radio Configuration
0.70 kg (1.54 lb)
Weight: Dual-Radio Configuration
0.73 kg (1.61 lb)
DIN Rail Mount
Optional
Operating Temperature
-40ºC to 75ºC (-40ºF to 167ºF)
Humidity
95% operating humidity @ 60ºC non-condensing
Contact Us